September 19, 2021

Fix Ethernet Not Working in Windows 10 [SOLVED]

Fix Ethernet Not Working in Windows 10: If you’re not able to access the internet via Ethernet cable, then you need to troubleshoot this issue. If you will open the Network and Sharing Center you will find that the PC doesn’t recognize the ethernet connection. But if you try to access the internet when connected over WiFi with the same connection then you will be able to browse the internet which means the problem may be caused because of incorrect network configuration, corrupt or outdated network drivers, damaged or faulty ethernet cable, hardware issues etc.

Fix Ethernet Not Working in Windows 10 [SOLVED]

create a restore point  just in case something goes wrong.

Before continuing, make sure to follow these basic steps to fix the problem:

  • Try to connect the ethernet cable to another port on the router, as chances are the particular port might be damaged.
  • Try to use another cable, as the cable itself might be damaged.
  • Try to unplug the cable then again reconnect.
  • Try to connect the ethernet to another PC to see if the problem is resolved. If the ethernet works on the other PC then your PC hardware might be damaged and you need to send it to repair.

Method 1: Run Network Troubleshooter

1.Press Windows Key + I to open Settings then click on Update & Security.

2.From the left-hand menu select Troubleshoot.

3.Under Troubleshoot click on Internet Connections and then click Run the troubleshooter.

4.Follow further on-screen instructions to run the troubleshooter.

5.Reboot your PC to save changes.

Method 2: Reset the Ethernet Adapter

1.Press Windows Key + I to open Settings then click on the Network & Internet icon.

2.From the left-hand menu click on Status.

3.Now under Status scroll down to bottom and click on Network reset link.

4.On the Network reset page, click on “Reset now” button.

5.Now again try to connect the Ethernet with PC and see if you’re able to Fix Ethernet Not Working in Windows 10.

Method 3: Enable Ethernet Device and Update Drivers

1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

2.Expand Network adapters, then right-click on your Ethernet device and select Enable.

Note: If it’s already enabled then skip this step.

3.Again right-click on it and select Update Driver.

4.Select “Search automatically for updated driver software” and let it automatically install any new drivers available.

5.Reboot your PC to save changes and again check if you’re able to Fix Ethernet Not Working in Windows 10 or not.

6.If not, then again go to Device Manager, right-click on your Ethernet device and select Update Driver.

7.This time select “Browse my computer for driver software.

8.Now click “Let me pick from a list of available drivers on my computer.

9.Select the latest Realtek PCIe FE Family Controller driver and click Next.

10.Let it install the new drivers and reboot your PC.

Method 4: Enable Ethernet Connection

1.Press Windows Key + R then type ncpa.cpl and hit Enter to open Network Connections.

2.Right-click on Ethernet connection and select Enable.

3.This will enable the Ethernet connection, again try to connect to the Ethernet network.

Method 5: Temporarily Disable Antivirus or Firewall

1.Right-click on the Antivirus Program icon from the system tray and select Disable.

2.Next, select the time frame for which the Antivirus will remain disabled.

Note: Choose the smallest amount of time possible for example 15 minutes or 30 minutes.

3.Once done, again try to access the Internet and check if the error resolves or not.

4.Type control in Windows Search then click on Control Panel from the search result.

5.Next, click on System and Security and then click on Windows Firewall.

6.Now from the left window pane click on Turn Windows Firewall on or off.

7.Select Turn off Windows Firewall and restart your PC. Again try to access the internet and see if you’re able to Fix Ethernet Not Working in Windows 10.

If the above method doesn’t work make sure to follow the exact same steps to turn on your Firewall again.

Method 6: Flush DNS and Reset TCP/IP

1.Right-click on Windows Button and select “Command Prompt(Admin).

2.Now type the following command and press Enter after each one:

3.Again open Admin Command Prompt and type the following and hit enter after each one:

4.Reboot to apply changes. Flushing DNS seems to Fix Ethernet Not Working in Windows 10.

Method 7: Change Power Management Settings for Ethernet

1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

2.Expand Network adapters, then right-click on your Ethernet device and select Properties.

3.Switch to Power Management tab under the Ethernet Properties window.

4.Next, uncheckAllow the computer to turn off this device to save power“.

5.Click Apply followed by OK.

6.Reboot your PC to save changes.

Method 8: Use Google DNS

1.Open Control Panel and click on Network and Internet.

2.Next, click Network and Sharing Center then click on Change adapter settings.

3.Select your Wi-Fi then double click on it and select Properties.

4.Now select Internet Protocol Version 4 (TCP/IPv4) and click Properties.

5.Checkmark “Use the following DNS server addresses” and type the following:

Preferred DNS server: 8.8.8.8
Alternate DNS server: 8.8.4.4

6.Close everything and you may be able to Fix Ethernet Not Working in Windows 10.

Recommended:

  • Fix HP Touchpad Not Working in Windows 10
  • How to Extract Images from Word Document 2019 [GUIDE]
  • Download official Windows 10 ISO without Media Creation Tool
  • Fix MSVCP140.dll is Missing in Windows 10

That’s it you have successfully Fix Ethernet Not Working in Windows 10 but if you still have any questions regarding this tutorial then feel free to ask them in the comment’s section.